Creating Offset Surfaces

Creating Offset Surfaces

Menu: Insert > Surfaces > Offset

Toolbar: Surfaces > Offset.

The Offset tool is used to create a surface that is at an offset distance from a reference

surface. To do so, choose the Offset tool from the Surfaces toolbar. The Offset

Surface Definition dialog box is displayed, 

Offset_Surface_Definition_dialog_box

Select the reference surface from the geometry area and specify the offset value in the Offset

spinner. Choose the Reverse Direction button available in the dialog box to reverse the offset

direction. The Both sides check box is selected to create the offset surface on both sides of the

reference surface. The Repeat object after OK check box is used to create multiple offset surfaces.

Select the Repeat object after OK check box and exit the Offset Surface Definition dialog box.

The_Object_Repetitio_ dialog_box

In this dialog box specify the required number of intance(s). Choose the OK button to create

the offset surfaces

An_offset_surface

• Tweet
• Share
• Share
• Share
• Share

About Er.Vishal

This is dummy text. It is not meant to be read. Accordingly, it is difficult to figure out when to end it. But then, this is dummy text. It is not meant to be read. Period.

Related Post